Module cách ly ngắn mạch

Module cách ly ngắn mạch

Thông tin chi tiết

Isolation Module A6C50000005
– The isolation module is used to isolate a short circuit on the detection
bus. The device will automatically recover to its normal status when the
cause of the short circuit disapears.
– The isolation module separates a short circuit on the F-Bus.
– Parallel connection on the first place of each branch or stub is possible.
– No device address is required.
– When a single loop is used to connect devices mounted on several
floors it is recommended to install one isolation module on each floor.
– Up to 25 load factors can be mounted to an isolation module.
– The connection is polarity free.
– Faults will be automatically detected and displayed on the controller.
– Operating temperature -20… +50 °C
– Relative humidity ≤95 % (40 ± 2 °C)
– Activation current ≤0.5 mA
– Pass through voltage ≤1 VDC
– Wiring Capacity 1.0… 1.5 mm²