MODULE ĐIỀU KHIỂN 1 NGỎ RA

MODULE ĐIỀU KHIỂN 1 NGỎ RA

Thông tin chi tiết

– Provides one no/nc contact (GSA-CR/MCR)
Form “C” dry relay contact can be used to control external appliances such as door closers, fans, dampers etc.
– Allows group operation of sounder bases
The GSA-CRR/MCRR reverses the polarity of its 24 Vdc output, thus activating all Sounder Bases on the data loop.
– Plug-in (UIO) or standard 1-gang mount
UIO versions allow quick installation where multiple modules are
required. The 1-gang mount version is ideal for remote locations
that require a single module.
– Automatic device mapping
Signature modules transmit information to the loop controller regarding their circuit locations with respect to other Signature devices on the wire loop.
– Electronic addressing
Programmable addresses are downloaded from the loop controller, a PC, or the SIGA-PRO Signature Program/Service Tool; there are no switches or dials to set.
– Intelligent device with microprocessor
All decisions are made at the module to allow lower communication speed with substantially improved control panel response time and less sensitivity to line noise and loop wiring properties; twisted or shielded wire is not required.
– Ground fault detection by address
Detects ground faults right down to the device level.